Sunday, December 2, 2012

I had intended to make this post before Thanksgiving, but it was a crazy week and I was pretty short on time, so I'm a little behind here.  I just got back in town after a great ten day visit with my family.

I hit a big milestone before I left town though.  I finished the neck, meaning I've finally finished the entire body.  All that's left to actually sculpt is her hair.  So close now.

I already knew the position I wanted her head in, tilted to her left and back just a bit, so figuring out the length of the neck was probably the trickiest part.  I started by attaching two wires to the top of her spine.  I found the right length and angle, got a nice "back of the neck" curve, then held the head in place with a few spring clips while I welded the wires coming from her spine to the back hairline.  I started working on her right side first, which is the stretched, straighter side of her neck.  It was pretty easy going and when I finished it, it looked great.  Then I moved to the other side, but after struggling for an hour or so, I realized her neck was going to be about 3 inches thick.  I had attached one of the first wires on the other side in the wrong spot and her entire neck was off center.  The head was still in the right place, but the neck was completely off.  Fortunately, I didn't have to cut the whole thing off and start over, though I did have to cut almost every wire, bend it a little further to the side and reattach it at another point.  It was a fairly easy fix though, and this time, it really did look great.  The other side of the neck is sort of scrunched up, so it has a lot of wrinkles.  It was a little trickier than the first side, but it worked itself out.  I got to bend a few nice complex curves to accomplish the wrinkles.  I filled out the front of the neck last, and that was all she wrote.

There were a few bumps along the way.  I burnt through a few wires.  I wish I would have kept track of how many times I've done that on this piece.  You'd think I'd learn, but I always push it just a second too long.  Then I say bad words.  Then I fix it.

So anyway, I finished the neck.  She looks amazing.  I am so beyond happy. 


I picked up a new patina color, vista burgundy, but it ended up looking pretty chocolaty.  The original vista rust, now that it's been working the steel for about a month, is starting to look good.  I may still try the red, just to see how it looks, but so far I think I like the rust best.

I also started doing a little work on the base.  I can't get too far ahead of myself on the base, because I can't really do too much to it until I've finished the patina and clear coat on the rest of the piece, but I got a little jump on it.  I was originally going to try to cover it with a sheet of wrinkled copper foil.  After further consideration though, I realized that I'd need to cut into it in two spots to get it around the feet, and that would leave two seams across the top.  It also wouldn't really work for bending it around the sides, as the base is an odd shape.  Instead, I've decided to cover it with overlapping strips of the wrinkled copper foil.  That way the seams will look/be intentional and a little more uniform throughout the base.  Also, I decided to put one long strip around the sides, rather than trying to fold it over from the top.  I measured the circumference of the base (a little under 15 feet) and bought an additional 15 feet of the foil to supplement the original 10 or 15 feet I bought.  The base is only 3.75 inches tall, so I rolled out the entire length of foil and cut it in half lengthwise.  It's 1 foot wide, so that gave me two strips of foil at 6 inches by 15 feet,  I rolled one strip back up and began wrinkling the other.  


When I finished wrinkling the whole length, I laid the first eight feet along the edge of a sheet of plywood and bent a nice straight line along one edge, sliding it down and continuing the line until I finished all fifteen feet. I then marked a line on the plywood at 3.75 inches, lined the folded edge up against the line and repeated the process, folding the other side.  Now I have a fifteen foot long strip of the wrinkled foil with clean folded edges at the 3.75 inch height of the base.  Starting in the back V of the base, I wrapped it all the way around it, finishing at the other side of the V.  As I said, I can't attach it until I've applied the patina and clear coat to the sculpture itself, but at least I got a jump on it and I now have a good idea of what it's going to look like.  I love it!

So next up is the hair.  Still not 100% sure how that's going to play out.  I have an idea of what I want, but I think I need to look at some images online to get an idea of how I want the hair to fall.  Definitely going to be long and wavy.  My model had shoulder length hair and I asked her to tie it up anyway, so I could get clear shots of her neck and shoulders, so this is one aspect of the piece that I have no reference photos of.  I'll be using all thinner wire for this part.  I need to figure out a better way to heat this stuff up.  It's taking me forever to get them hot with the little propane torch I have and I need to do it to about 50 more pieces.  Oy.  So hair.  That's what I'll be focusing on through December.  Wish me luck!

Winter is my least favorite time of year, even in a temperate climate like Los Angeles.  When daylight savings ends, it gets dark before I leave my day job.  "The darkness" also brings with it cooler days, cold nights and rain.  But not even good rain.  Usually just enough to be uncomfortable and a nuisance.  Only rarely do we get a good heavy soaking in LA, and it's even more rare that we get any thunder and lightning with it.  Summer rains are almost non-existent.  Being part lizard and loving the warm summer nights, this cold, gloomy time of year is always a bit of a downer for me.  But on the flip side, it always brings a beautiful musical shift to my evenings, with lots of bowed strings and more melancholy music. I got off the plane last night and it had apparently been raining all day.  The rain had stopped, but everything was wet and just chilly enough to need a light coat.  When I got home and unpacked, this song bubbled up, perfectly fitting my emotional state.  I have no idea what he's singing about, but the textures, dynamics and tones speak volumes to my heart.  It was a perfect song to listen to while standing back and assessing my metal lady after nearly two weeks of being away.


Tuesday, November 6, 2012

Getting closer and closer every day. 

I finished relighting the dragon, the jellyfish and a seahorse just in time to clean up my loft and squeeze in a few hours of sleep before I opened my doors for our fall art walk.  Ever since our spring art walk, I had really been hoping to have this piece done in time for this one, as it's sort of the one year mark that I've been working on this piece, but alas, as close as I am, I'm not that close.  Had a great weekend anyway though, and as soon as it ended I got back to work on the face.  First I gave her a hairline, closing off her forehead, and added a few more swirls.  Ears were next.  My first attempt used one line that swirled its way through the entire ear.  I made one and wasn't that excited by it, so I scrapped it and tried again, this time with a design using a few lines.  Laid in the first line and an accent line, and loved it.



The second line that finishes the ear actually works its way into the ear from the jawline.  This time the design was dead on and the ears look great. 

Instead of creating a wire scalp for her and building her hair off that, her hair is going to start off her hairline and then continue building off itself.  I still needed to figure out the shape of the rest of her head though so I found a few images of bald female profiles to help with that shape.  I temped in a wire starting at her slight widows peak, working its way over her head and down her neck. Once  I locked the shape in, I added the hairline at the back of her head.  Then I continued working on her jaw and chin. 



I've pretty much finished the head now, and am ready to start on her neck.  The first few lines I lay in will be starting at her spine.  I'm not expecting this to be too hard once I get started, but these first few lines are going to be tricky.  They'll be the lines that define the angle and position of her head, and it's a pretty important aspect of the sculpture.  The way she holds her head will determine the emotion of the piece.  I've been holding the head up and moving it around trying to find the right position for the last few days.  I had been envisioning her head tilted and turned to her left with her chin slightly down.  Tonight I decided to keep it tilted and turned to the left, but to also let it roll back a bit instead.  It definitely gives a more sultry, and more importantly, a more languid feel to her pose.  This exposes more of the underside of her chin though, and I realized that needed a little more work.  I ended up cutting a few welds on the chin and reworking the wires.  I'll finish that up tomorrow and hopefully by the end of the night, her head will be attached to the body.

I also spent some time this past weekend playing with patinas again.  I picked up more of the green that I'll be using for her body to do some more tests.  It's looking good.  I had been thinking of a burgundy patina for her hair, but was swayed at the last minute and ended up picking up a rust patina instead.  It's still working the metal, but so far, I don't really like this color for the hair.  I think I'll probably end up picking up some burgundy and see how that looks in comparison.  I also started putting a little focus on the base.  I wrinkled up some strips of the copper foil and laid them out around her feet.  My current plan is to use that blueish green patina I tested a few months back, but after seeing the large strips of the copper on the base, I'm considering not using a patina on it at all.  The wrinkled copper looked so beautiful in the light.  It looked like she was walking on the surface of the sun.  I'm not committing to either idea just yet, as I really do love the blue green as well.  Probably won't decide on that until the rest of the sculpture has been finished with the patinas.

So that's where I'm at.  The rest of this week is going to be all about attaching the head and building up the neck.

This has been a pretty excellent year in music.  There have been a lot of great new releases by Grizzly Bear, Tame Impala, Solid Gold, Kaki King, Alberta Cross, The Album Leaf, The Raveonettes, Polica, Chromatics, Sinead O'connor, Cookie Duster, Silversun Pickups, Miike Snow, Patrick Watson, and even an amazing new release from The Smashing Pumpkins, who I gave up on in the late 90s.  I think my favorite album of the year though, is the third release from an awesome little Canadian band called The Luyas.  I love their first two albums and I had high hopes for the new disc, but I wasn't really expecting to love it as much as I do. Needless to say, I've been listening to them a lot these last few weeks as I've been working on the face.  This track isn't from the new album, but it's one of my favorite tracks from their last album.  So quirky and beautiful.

Wednesday, October 17, 2012

Well, so much for posting pictures as elements of the face came together.  I was making such good progress, and liking said progress so much, that I didn't want to stop and I've now finished the face!  I also hit a big milestone last week: the one year mark for working on this piece.  Looking back, it's hard to believe it's been a whole year.  On the other hand, it feels like forever and I can't believe I'm still working on it.  I am still incredibly happy with it though, so it's been worth every second.

When I started this piece, I knew it was going to be my biggest challenge as a sculptor yet, but I felt pretty good about the whole thing.  Except for the face.  I was completely intimidated by that one section, far more than the rest of the piece.  Sure there are details like fingers and toes throughout the body, but for the most part, it's a lot of smooth surfaces with slight shifts here and there for muscles.  That really frees up the reins for the design aspect of the wirework.  The face, however, has a lot of detail in it.  I wasn't sure if the idea I had for translating it to wire was going to work.  My stomach has been twisting and turning for the last twelve months, thinking about how I was going to do this.  And that's not even counting the years I spent planning this piece.  But after all that time spent worrying about it, it actually wasn't that bad.  I mean, it was actually pretty easy.  Well, that may be an exaggeration.  Maybe not easy, but it was a lot easier than I expected.

Using the mannequin head was a tremendous help at times and a bit of a hinderance at others, but when all is said and done, I'm really glad I used it for this part of the sculpture.  There are so many complex curves working their way through all the facial features that I'm not sure I could have done this freehand.

I decided I needed to start with something fairly central and work my way out from there.  The nose wouldn't work as a starting point because of the design (the tip and bridge of the nose are only connected to the rest of the face at one point, the forehead), so I started with the lips and chin.  I was able to move through them pretty quickly, mostly because they're soft, gentle curves.  I added a few lines in the lips to give them shape and hint at the natural lines that are there.  It looked really good.  I actually even cut two of the lines back off because I didn't need them.  I then made the little divot above the lip (I looked it up, that's called the philtrum) and the two nostrils.


With this groundwork set, I began to move outward from there, and on to the sides of the nose.  That slowed down my progress.  A lot of hard curves twisting about.  I used the thickest of the three thinner wires the first time and after struggling for a full night, I got the shape, but the wire was too thick and made the line, which should have been delicate, look a little too strong.  I tried it with the thinnest wire next and it was considerably easier to bend.  However, I've learned that heating this sprung steel wire before I use it makes it easier to bend when it cools off, but it becomes really brittle.  As I was twisting my way through all the curves around the nose, I kept breaking the wire.  I spent a few nights playing with that, to no avail.  Finally I used the medium thickness wire and wrestled with that for a few days.  It finally worked.  Those nose lines then work their way up into the eyebrows.


I decided from this point on to do one side of the face at a time, rather than matching lines, side to side, as I moved through it.  Bending the wire into the eye sockets was a little challenging, though not as bad as the nose.  When the wires meet at the outside of the eye, they erupt into swirls spreading across the temples towards the ears.  There were a lot of swirls, so that took some time, but it looks gorgeous.  I used the medium thickness wire for most of these, but made some of the swirls with the thinnest wire.


I added the tip and bridge of the nose next.  That gave the nose some profile shape.  I started with a tear drop shape at the tip, which turns into a single line running up the bridge.  It continues on to the forehead, a fairly smooth surface with a simple but pretty design, ending in a small heart centered on her forehead.  I also put a small dimple into the chin to give it some definition and profile shape, as well as fill in the open area that was left when I put in the initial chin lines.  The eyes were still just the sockets, so I added the closed eyelids.  Eventually, when the welding is all done, I'll be adding eyelashes with jewelry wire.  Finally, I added a few more swirls to the forehead, and with that, the face was finished!


The were a few unexpected hiccups along the way.  I broke more than a few welds and had to redo them.  This wire is so thin that I can't really hold the welder to it for too long or it burns through the wire, even on the welder's lowest setting, so the welds don't really bite that deep into the metal.  Then I grind the welds down so much that there's actually very little filler holding the wires together.  When I put stress on the welds by grinding another area, or trying to bend wire that's already attached, the welds break.  I tried to leave a little extra filler on them when I re-welded them, but I couldn't leave too much or it started looking chunky.  I also had to extend the face a little bit, as the mannequin head is close to human sized, but just a little too small.  I ended up shaving her bottom lip off the mannequin head to be able to extend the face a touch.  Between the weld burns and the shaved lip, this poor mannequin head has taken quite a beating.

So with the face done, there's not much left to do on the head.  I still need to work on her hairline and add ears.  That'll be interesting.  When that's done, I can make the neck and attach the head to the rest of the piece, and then all I have to do is add the hair.  I'm a little nervous about that, but not as nervous as I was starting the face.  At that point the sculpting is done and all I have to do is finish it off with the patina and cover the base in patinated copper.  I feel like I'm almost done, but I realize I do still have a fair amount of work left.

Fall Art Walk at The Brewery is coming up this weekend.  I had to take a break from the face for a couple days last week to change out about 2500 Christmas lights from the dragon and one of the seahorses.  I'm actually still working on that.  I have to clean up and organize my space too, so it looks like I'm done with the piece for the next week.  Once art walk is over though, I'm going to finish this thing!  My guess now is that I'll be done around Christmas.

As I've been working on the face independently from the body, I took the support pipe off the sculpture's base and have let her stand free for the last few weeks.  What a difference it makes looking at her without that thick pipe running up to her back.  She looks so light and free and... natural!  I'm so happy with how this is turning out.  If I can keep it up through these last few months, this is going to be a really beautiful piece.

I did skip out for a few nights over the last few weeks to see a few concerts.  The Black Keys with Tegan & Sara and Peter Gabriel.  All amazing shows.  I've been listening to a lot more Black Keys since the show.  This is a favorite.  Another that sounds great loud in my loft.

Saturday, September 22, 2012

Well, I made it back from the desert in one piece.  Turned out to be a big year for me out there this year.  Not only did I decide to bring two fairly large projects out to the playa next year, I also got engaged!  It's going to be a busy year.  I've got a playa wedding to plan, an art car to assemble and my first static installation for Burning Man to build, which will also be my first big project with my fiancĂ©e.  I've already started making lists.  Long lists.  I have a lot to accomplish in the next eleven months, but first I need to finish the lady.

Got back a few weeks ago and as usual, I had a lot of cleaning and laundry to do once I landed in LA, but I got back to work pretty quickly.  I immediately shortened the fingers on the second hand.  As expected, it was pretty easy and only took me a few days.  I'm much happier with it now.

Next up was to start the head.  So far, I've been doing everything entirely free hand.  For the face, I decided to draw the design on a mannequin head I picked up a few months ago and try to bend the wire around it.  Drawing is one of my least favorite parts of this whole process though.  I draw like a 2nd grader with a crayon tucked into my chubby little fist.  Drawing three dimensionally on a mannequin head?  Well, I wasn't looking forward to it, but fortunately, once I got started, it actually went really well.  I found some nice lines within the natural lines of the face, and augmented it with some really pretty swirls coming out of her eyes and lining her hairline.  The lines I drew are far from perfect, but at least I have an idea of what the lines will look like now.  It took me three or four days to work it out, but I finally started bending wire a few nights ago.  I'm using the smaller wires again, but this time I preheated the wire and it's actually really easy to bend now.  I'm welding some pretty small curls though, and it's pretty tricky, putting some of these pieces together.  It's slow going, but I'm pretty confident it's going to look great.



So, it looks like I'm going to be working on this for the next few weeks or so.  I'll try to post some pics as elements of the face come together.

I've been wanting to post this song for a while, but I haven't found it on youtube yet.  Just found it on soundcloud, so hopefully this link will work.  It's called "Cut Me, Focus" and it's from Cookie Duster, a side project of Brenden Canning of Broken Social Scene.  Doesn't sound anything like BSS, but I love it.  It sounds amazing in my loft, really loud.  =)

Monday, August 20, 2012

Well, I've finished the second hand.  All that's left now is the face, the hair and the patina to finish it.  I meant to write when I finished the arm but things have been pretty crazy with Burning Man coming up.  The forearm was trickier than I thought it would be, mostly because of the twist in the arm, and trying to match the design and size of the first arm, given that twist.  It ended up looking pretty good though, and it's at a nice angle, with this elbow dropped considerably lower than the first, and the forearm canted slightly forward.  The difference in the position of the two arms gives it a very natural and realistic movement that ties in well with the positioning of the legs.


I started the second hand next.  I had already made the fingernails and bent the outlines of these knuckles when I did the first hand, so I had a pretty good jump on it, but I still needed to make the wrinkles of the knuckles and then attach each of the finger segments.  Since the first hand was bent forward and the second hand is bent back, that meant the wires leading to the first knuckles of this hand didn't flow out of the arm like the other, due to the wrinkles created by the bent wrist.  I attached those first knuckles and moved on to the palm.  I found myself once again working with the stiff thinner wire and it fought me the entire way, right down to the last weld.  I didn't use my friends suggestion that I mentioned a few posts ago, of trying to heat it up first, because I'm not sure of what the side effects of doing that are just yet and I wanted to make sure the hands matched.  I will use that trick when I move on to the face though.  When the main lines of the palm were finished, I started building up the meat of the fingers and attaching them, starting with the pinkie.


These fingers are also in a different position than those of the first hand, so it was fun getting them into the right shapes.  As I had hoped, the positions of the fingers add a graceful elegance to her pose.  Admittedly, the hands aren't as dainty as I had hoped them to be, but she's not really a dainty girl to begin with, so they fit her body fine.  Alas, when all was said and done though, I realized that the fingers on this hand are a touch too long.  But I saw that coming.  It all started with the pinkie.  I wanted to make it curl in and touch the palm, and in doing so, I extended the length between the first and second knuckles a little too far, and as I worked my way down the hand, that length got a little longer, finger by finger.  By the time I got to the fourth finger, it was getting a little out of control, so I actually already shortened a few of them, but I need to shorten all four fingers one more time to make myself okay with it or I will see it every time I look at the piece.  No biggie though, could be worse.  It'll maybe add one day of work.  It's just the one segment of each finger, so I can cut along the welds (three per finger), shorten the wires, reattach and grind.  Easy enough.  But for all intents and purposes, they are done and it looks great.

So now, as far as sculpting, all that's left is the head and hair, but I'm taking a break before I dive into that.  I leave for Burning Man in one week.  It's time to pack and I'm super excited.  I've been working on this piece, daily, for over ten months now.  By far, the longest I've worked on any piece.   Calander-wise anyway.  As far as straight hours, I'm probably pretty close to the same as the dragon, but I packed that into 5 1/2 months, working 80 hour weeks the entire project.  This has been ten long months of working on the same piece, day in and day out, and to be honest, I'm getting pretty burnt out.  Granted, the majority of the piece is done now, but with the amount of design and detail in what I have left, it's easily going to be the most challenging bit of sculpting I've ever done.  Bad time to lose my juju.  But now I get to take a break, go out to the desert, recharge, get inspired, get motivated, then come back here and finish this piece.  The timing couldn't be better.

Burning Man changed my life in 2001.  It started me on my path as a sculptor, and has been a huge part of my life ever since.  It's my new years, birthday, and Christmas all rolled into one.  It's how I mark time.  When I look back at any of the last eleven years, I see them measured between burns rather than being bookended by new years eve parties.  It's when I reflect on what I've done in the past solar cycle, and what I want to accomplish in the next.  Friendships, relationships, projects, life events... all tie into burns, or fall in between them.  I sat at the base of a massive sculpture called Bliss Dance one night two burns ago, marveling up at her, and decided it was finally time to do my nude.  It had been smoldering in the back of my mind for over four years at that point, but until then, I wasn't ready to tackle it.  But as I sat there that night, I realized that the time had come.  I came back to Los Angeles completely inspired.  Over the next few months, I thought a lot about the pose as I finished up a few other small projects, and finally took my first few steps towards starting the project.  I had one fairly large setback though, right out of the gate, and ended up taking a step back.  False start, and I lost my momentum.  Before I knew it, it was time to head back out to the desert.  At last years burn, I was really disappointed that the year had passed and I hadn't bent a single piece of wire for this piece yet.  I reflected on the failure and fears that made me take that step back and then let those fears be carried off with the playa dust.  And, as always happens out on the playa, I got inspired.  Really inspired.  Fired up.  I came home and had one month til Art Walk.  I took that time to prep for art walk, but also to find and hire a model and photographer, shoot the model, start the design and start figuring out the base.  When art walk ended, it took me one week to start bending wire.  Now the year has passed, I'm heading out to the desert again, the piece is almost finished, and it looks even more beautiful than I had hoped.  It's been a struggle, no doubt, but I am thrilled with the way it's turned out.  What a journey the year has been.  I'm so excited.

So now as I leave you for a few weeks, and I leave my metal lady here, waiting for my return, here's one more picture.  This is what she looks like tonight.


I've been hearing word from friends who are already on the playa that it's incredibly dusty this year, one of the worst in memory, with heavy windstorms.  So I leave you with this...



Monday, July 30, 2012

Just a quick update.  I finished the second arm up to the elbow and started working on the forearm.  Tricky matching the diameter and circumference of the first arm, but I think I got it so far.  It's looking good.  Onward!


Friday, July 20, 2012

Started working on the second arm this week.  I'm trying to match the design pattern of the first arm to keep them symmetrical, but this arm is in a different position, creating different planes and angles.  Like the first arm, it took me a few days to really find those first few lines and dial them in, but now that I found them it seems like the rest is starting to fall into place.  Hopefully I'll hit my stride again this weekend and work though it pretty easily.  I don't want to get too cocky, I just started it, but I should be able to finish the arm and maybe even the hand before burning man. 

One of my friends and mentors stopped by this week to check in on my progress.  He hadn't been by in a few weeks, so it was his first time seeing the hand.   We chatted a bit about the sprung steel and how I was having a hard time working with it, but I couldn't find regular mild steel rod that thin.  He broke me off some amazing knowledge.  He asked if I had tried heating up the spring steel.  I explained that my experience with heating up steel has been iffy at best.  It's good if I'm trying to bend a tight curve or a sharp point, but if I'm trying to get nice smooth curves, it just doesn't work that well.  That wasn't what he meant though.  He told me that if I heat up the sprung steel rod and let it cool slowly, it would soften up the metal.  !!!  I tried a test piece tonight and it worked pretty well.  Some of the curves were still a little chunky, but it was a *lot* easier to bend.  I'm going to do another test piece this weekend and try to heat it a little more evenly and see if that makes any difference.  Even if tonight's experiment is the best I can get it, it's still going to make the face a thousand times easier to shape.  So that was a nice surprise.  The face is going to be tricky enough without having to fight the wire.

I'll probably bring the mannequin head out to the desert with me and start drawing on it seriously while I'm out there.  The madness and beauty of the playa should provide some good inspiration. 

That's all for now.  Hopefully I'll have some cool pictures of the second arm soon.